Glaze plus luxury is the perfect pick if you are looking for a rich finish for your walls. The paint radiates a higher sheen and gives a smooth and luxurious finish. Paint your exterior walls with our Glaze plus luxury and create an inviting ambiance of elegance.

Pigments : Titanium Rutile, High Performance Additives, High Quality Mineral Extenders.
Binder : Pure Acrylic
Dilution : 30-40% by volume with clean potable water
Colours : Brilliant White & 1500 Shades
Texture : Glaze Finish
Touch dry : 30 Minutes
Hard dry : 8 hrs.
Washability : 2 Weeks.
Recoating Time : 4 6 hrs
Coverage : 120-150 sqft / Ltr in 2 coats.
(Coverage depends on the substrate condition)
Pack Size : 1 Ltr, 4 Ltrs, 10 Ltrs & 20 Ltrs
  • Keep surface clean and dry. Remove dust, dirt, grease and any faking paint from the surface and sand to smooth. Ensure there is no algae or moisture on the wall.
  • For best result apply one coat of Wallmaax Cement Primer, allow it to dry for 6-8 hrs, and then apply thin coats of Wallmaax Acrylic wall putty to smoothen the surface. After drying for 4-6 hrs sand the surface with water paper 180, wipe clean and apply another coat of primer and allow drying for 6-8 hrs.
  • Then sand the surface again with water paper 320-400 and wipe clean. Thin Wallmaax GLAZE emulsion with 30-40% clean water and apply with brush followed by rolling with sponge roller. Apply 2-3 coats with brush and roller, with an interval of 3-4hrs.