A super scrubbable, tough and stain resistant StainEx emulsion with added stain guard that will help keep your home looking fresh for a long time.

Pigments : Titanium Rutile, High Performance Additives, High Quality Mineral Extenders
Binder : Pure Acrylic
Dilution : 20-30% by volume with clean potable water.
Colours : Brilliant white and 1500 shades
Texture : Sheen Finish
Touch dry : 30 Minutes
Hard dry : 8 hrs.
Recoating Time : 4 6 hrs.
Coverage : 80-120 sqft / Ltr. in 2 coats.
(Coverage is depend on the substrate condition.)
Pack Size : 1 Ltr, 4 Ltrs , 10 Ltrs & 20 Ltrs
  • Keep surface clean and dry. Remove dust, dirt, grease and any flaking paint from the surface and sand to smooth. Ensure there is no algae or moisture on the wall.
  • For best result apply one coat of Wallmaax Cement Primer, allow it to dry for 6-8 hrs and then apply thin coats of Wallmaax Acrylic Wallputty to smoothen the surface. After drying for 4-6 hrs sand the surface with water paper 180, wipe clean and apply another coat of primer and allow drying for 6-8 hrs then sand the surface again with water paper 320 or 400 and wipe clean. Thin Wallmaax StainEx emulsion with 30-40% clean water and apply wth brush followed by rolling with sponge roller. Apply 2-3 coats with brush and roller with an interval of 4-6 hrs.