Wallmaax Epoxy Coating is a high-performance primer designed to offer excellent corrosion protection to metal substrates. Extending the life of structural steel especially those in marine areas are made easier with our corrosion resistant Wallmaax Epoxy Coating.
| Pigments | : | |
| Binder | : | |
| Dilution | : | |
| Colours | : | |
| Texture | : | |
| Touch dry | : | |
| Hard dry | : | |
| Washability | : | |
| Recoating Time | : | |
| Coverage | : | |
| Application Method | : | Brushing ,Rolling & Spraying. |
| Pack Size | : | 1 Kg, 4 Kg, 10 Kg & 20 Kg |
- Keep surface clean and dry. Sand the surface to remove the rust from the metal surface.
- Apply two coats of Wallmaax Epoxy Primer on this metal surface with a six-hour time difference between the application of two coats.
- Then with a four-hour time gap, apply two coats of Wallmaax Epoxy Topcoat over it.
- For best result use only Wallmaax thinner on Epoxy Topcoat and Primer at the ratio of 200 ml to 1 litre respectively.